Trigonometry Calculator — every angle answered and proven
Type any trig value — sin(30°), cos(pi/4), asin(0.5) — and this trigonometry calculator evaluates it exactly at special angles, converts degrees and radians, and proves the answer with an independent recomputation and an identity check. Undefined stays undefined, and a missing unit is refused rather than guessed.
✓100% free — no paywall, ever
✓No sign-up, no app
✓Every answer verified before you see it
In short
Trigonometry is the study of angles and ratios: sin, cos and tan relate an angle to the sides of a right triangle, and their values repeat every 360°. This trigonometry calculator evaluates all six trig functions and their inverses in degrees or radians, returning exact values at special angles — sin 30° = 1/2 — and proving every answer by recomputation plus an identity check.
Four ideas carry all of trigonometry
The right-triangle ratios, the identity that checks every answer, the degrees–radians conversion, and the reciprocal and inverse relations. The trigonometry calculator applies all four in the steps, so the method — not just the answer — is what you take away.
Worked examples — a special angle, a radian, a reference angle, an inverse
A special angle from its triangle, a radian value read directly, a second-quadrant angle reduced to the first quadrant, and an inverse question answered in both units. Each check below is the same recomputation and identity proof this trigonometry calculator prints on every problem.
sin(30°)
1.30° is a special angle, from the 30°–60°–90° triangle with sides 1, √3, 2
2.sin is opposite over hypotenuse: the side opposite 30° is 1, the hypotenuse is 2
1/2
Proof: sin²(30°) + cos²(30°) = 1/4 + 3/4 = 1 ✓ — the identity check confirms the value.
cos(pi/4)
1.π/4 is radians: π/4 × 180/π = 45°
2.45° is a special angle, from the isosceles right triangle with legs 1, 1 and hypotenuse √2
3.cos is adjacent over hypotenuse: 1/√2 = √2/2
√2/2
Proof: recomputed from the radian value, cos(0.7854) ≈ 0.7071 ✓ — the same check this trigonometry calculator runs on every answer.
sin(150°)
1.150° is in quadrant II, so the reference angle is 180° − 150° = 30°
2.Sine is positive in quadrant II, so sin(150°) = sin(30°)
3.30° is a special angle: sin(30°) = 1/2
1/2
Proof: sin²(150°) + cos²(150°) = 1/4 + 3/4 = 1 ✓ — the identity holds in every quadrant.
asin(0.5)
1.asin asks: which angle has sine 0.5?
2.The principal range for asin is −90° to 90°
3.sin(30°) = 1/2, a special-angle value, so the angle is exact
30° = π/6
Proof: forward check — sin(30°) = 1/2, exactly the input ratio ✓.
Common mistakes — and how to dodge them
✕
Mixing up degrees and radians
sin(30°) = 0.5 but sin(30 rad) ≈ −0.988 — same digits, different question. Most wrong trig answers come from the wrong unit, not the wrong function. This trigonometry calculator refuses a bare number like sin(30) outright and asks for the unit, because guessing would silently print the wrong answer half the time. Always write °, deg or rad with the angle.
✕
Calling tan(90°) zero — or forgetting the sign
tan(90°) is undefined, not 0: cos(90°) = 0 sits in the denominator. And in the other quadrants the reference angle gives the size but the quadrant gives the sign: sin(210°) = −1/2, not 1/2, because sine is negative in quadrant III. Reduce to the first quadrant, then apply the sign — skipping either step is how sign errors happen.
✕
Reading sin⁻¹ as 1/sin
sin⁻¹(x) is the INVERSE function — the angle whose sine is x — not the reciprocal 1/sin(x). asin(0.5) = 30°, while 1/sin(30°) = 2: different questions, different answers. The reciprocal has its own name, cosecant: csc(30°) = 2. If you want the angle, use asin; if you want one-over-the-value, use csc.
Trigonometry Calculator — questions
What does a trigonometry calculator do?
A trigonometry calculator evaluates trig functions at angles: type sin(30°) and it returns 1/2, with the steps and a proof. This one covers all six functions — sin, cos, tan, csc, sec, cot — plus their inverses, in degrees or radians, and it converts between the two units. It also combines values, so sin(30°) + cos(60°) = 1 comes out exact, not as a rounded decimal.
Degrees or radians — which should I use?
Whichever your problem uses — but say so in the input. sin(30°) and sin(30 rad) are different questions with different answers, so a bare number is refused as ambiguous rather than guessed. Write the unit with the angle: sin(30°), cos(pi/4), tan(1.2 rad). The steps always show both units, so a degree answer carries its radian equivalent and vice versa.
What are exact trig values?
The values at special angles — multiples of 15° — that come out as clean fractions and square roots instead of decimals: sin 30° = 1/2, cos 45° = √2/2, tan 60° = √3. This trigonometry calculator returns those exact forms, found by reference-angle reduction from the first quadrant, and shows the decimal alongside. Angles like 37° have no clean exact form, so they get a clearly labelled decimal approximation — never a fake exact value.
Why is tan(90°) undefined?
Because tan = sin/cos, and cos(90°) = 0 — division by zero has no value. It is not 0 and not "infinity": it is undefined, and the page says so, showing the zero denominator as the reason. The same rule makes csc(0°) and sec(90°) undefined. Undefined is a verified answer here, not an error message — the zero is computed, not assumed.
What is inverse trig (asin, acos, atan)?
The reverse question: instead of "what is sin(30°)?", it asks "which angle has sine 0.5?" The answer is the principal value — asin gives angles from −90° to 90°, acos from 0° to 180° — and it is always shown in both units, so asin(0.5) = 30° = π/6. Ratios outside what the function can produce, like asin(2), get an honest "no real angle" answer with the bound shown.
Is the trigonometry calculator free?
Yes — free, no sign-up, no app, full steps and verification included on every problem. The scope is evaluating trig functions and inverses, combining their values, and converting degrees and radians. Trig equations, identities and triangle solving are separate pages in this cluster and are refused honestly here — each refusal names the reason instead of faking an answer.
A note on honest use: VerifySolve is built for learning. Use the steps to understand the method, then close the tab and try one on your own — that is where the grade actually comes from. If your teacher or school has a policy on calculators, follow it.