VerifySolveSolve a problem

Limit Calculator — the approach, proven both ways

Type a function and where x is heading — a number, a one-sided target like x->2+, or x->inf — and this limit calculator works it out with full steps: factoring for 0/0 forms, rationalization for surds, proven standard results at 0, and a computed approach table that checks the algebra.

  • ✓100% free — no paywall, ever
  • ✓No sign-up, no app
  • ✓Every answer verified before you see it

In short

A limit is the value a function approaches as x approaches a target — the approach matters, not the point itself. This limit calculator finds limits at a finite point (two-sided, left-hand and right-hand) and limits at ±infinity, by direct substitution, factoring, rationalization and proven standard results, and checks every answer against a numeric approach table computed from the original function.

Four ideas carry every limit on this page

Both sides must agree, 0/0 factors away, one standard result unlocks the trig limits, and at infinity the degrees decide. The limit calculator applies all four in the steps, so the method — not just the answer — is what you take away.

Two-sided limit

lim⁡x→af(x)=L  ⟺  lim⁡x→a−f(x)=lim⁡x→a+f(x)=L\lim_{x \to a} f(x) = L \;\Longleftrightarrow\; \lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L

Factoring a 0/0 form

lim⁡x→2x2−4x−2=lim⁡x→2(x+2)=4\lim_{x \to 2} \frac{x^2 - 4}{x - 2} = \lim_{x \to 2} (x + 2) = 4

Standard result

lim⁡x→0sin⁡xx=1\lim_{x \to 0} \frac{\sin x}{x} = 1

Limit at infinity

lim⁡x→∞3x2+12x2−5=32\lim_{x \to \infty} \frac{3x^2 + 1}{2x^2 - 5} = \frac{3}{2}

Worked examples — factoring, disagreement, a standard result, infinity

A 0/0 form that factors, a pole whose sides disagree, the classic sin(x)/x, and a rational function at infinity. Each check below is the same approach-table verification this limit calculator prints on every problem.

(x² − 4)/(x − 2), x → 2

  1. 1.Direct substitution gives 0/0 — indeterminate, not an answer
  2. 2.Factor: (x − 2)(x + 2) over (x − 2), cancel (x − 2) for x ≠ 2
  3. 3.The reduced form x + 2 at x = 2 is 4

4

Proof: from the left 3.9, 3.99, 3.999 → 4 and from the right 4.1, 4.01, 4.001 → 4 ✓ — both sides close in on 4.

1/x, x → 0

  1. 1.Direct substitution gives 1/0 — a pole, not a value
  2. 2.Sign check: just left of 0 the fraction is large and negative; just right it is large and positive
  3. 3.Left-hand limit −∞, right-hand limit +∞ — they disagree

does not exist

Proof: left values −10, −100, −1000 and right values 10, 100, 1000 ✓ — the disagreement is in the values, not the algebra.

sin(x)/x, x → 0

  1. 1.Direct substitution gives 0/0 — indeterminate
  2. 2.Use the standard result: lim (x→0) sin(x)/x = 1

1

Proof: 0.9983, 0.99998, 1.0000 from each side ✓ — the table closes in on 1, exactly as the rule says.

(3x² + 1)/(2x² − 5), x → ∞

  1. 1.Top and bottom both have degree 2
  2. 2.Divide by x²: every term but the leading ones vanishes as x grows
  3. 3.Leading coefficients: 3 / 2

3/2

Proof: x = 10 → 1.5436, x = 100 → 1.5004, x = 1000 → 1.5000 ✓ — the values settle at 3/2.

Common mistakes — and how to dodge them

Calling 0/0 the answer

0/0 is not zero, and it is not the answer — it is the indeterminate form, a signal that substitution alone cannot settle the limit. Factor and cancel, rationalize, or use a standard result, and only then substitute. Every 0/0 problem on this page says so in its first step, so the form is never mistaken for a value.

Checking only one side

A two-sided limit needs both sides to agree. 1/x at 0 looks like +∞ if you only approach from the right, and −∞ if you only approach from the left — the correct answer is that the two-sided limit does not exist. The approach table always shows both sides, so a one-sided answer is never passed off as the whole story.

Trusting the table alone

A table of values can suggest a limit, but it can never prove one — sin(1/x) near 0 fills a table with numbers that swing wildly and settle nowhere. That is why this limit calculator derives every answer from a rule first and uses the table only as a check, refusing problems no rule settles rather than guessing from the numbers.

Limit Calculator — questions

What is a limit, in plain words?

The value a function is heading toward as x gets close to a target — without ever needing to arrive there. lim (x→2) (x² − 4)/(x − 2) = 4 means the values close in on 4 as x closes in on 2, even though the function itself is undefined at x = 2. A limit describes the approach, not the point — and finding that approach is the whole job of this limit calculator.

How does this limit calculator verify its answer?

Two independent pieces must agree. First, an analytic rule settles the answer: direct substitution, factoring and cancellation, rationalization, a sign analysis, or a proven standard result. Then a numeric approach table — values computed from the original function at 0.1, 0.01, 0.001 and 0.0001 from the target — must close in on the same answer. If the table disagrees, the page refuses the problem rather than print an answer it cannot stand behind. The table corroborates; it never decides.

What is the difference between a two-sided limit and a one-sided limit?

A two-sided limit, written x -> 2, asks where the values head from both directions at once — and it exists only when both sides agree. A one-sided limit asks about one direction only: x -> 2+ approaches from the right, x -> 2- from the left. For 1/x at 0, the sides disagree (−∞ from the left, +∞ from the right), so the two-sided limit does not exist — but each one-sided limit is a real answer on its own. Type the + or − after the target, and this limit calculator answers that side alone.

What does "limit does not exist" mean?

That the values do not settle on one number. It happens two ways: the sides disagree, like 1/x at 0 (−∞ one side, +∞ the other), or the function is undefined on one side, like √x at 0, where there are no values left of the target at all. "Does not exist" is a proven answer, not a failure — this page names the side that is missing or the two values that disagree. It is different from oscillation, where the values keep swinging without settling: this limit calculator refuses those problems, with the reason stated.

What can this page not do?

It refuses honestly rather than guess. Oscillating functions like sin(1/x) at 0 have no limit and no table can prove one. Absolute-value bars, piecewise forms and products mixing polynomials with exp, ln or trig at infinity — like x·e^(−x) — need methods this page does not cover yet, such as L’Hôpital’s rule. Every refusal from this limit calculator names the reason and suggests the simpler form that would work.

Is the limit calculator free?

Yes — free, no sign-up, no app, full steps and the approach-table verification included on every problem. Limits are the foundation of calculus: once the idea clicks, the Derivative Calculator shows the limit that defines a slope, and the Integral Calculator shows the limit that defines an area.

Keep solving

A note on honest use: VerifySolve is built for learning. Use the steps to understand the method, then close the tab and try one on your own — that is where the grade actually comes from. If your teacher or school has a policy on calculators, follow it.